Telstra Go V2 Cellmate Portable Repeater

• The highest performance, fully certified, signal booster possible in the power class - Supports voice and data services: WCDMA/HSPA+/LTE (FDD). Real-time adapting capability ensures the best possible user experience, in actual user environments, which are constantly changing, with a variety of signals present.
• Automatic Gain Control (AGC) based on fast real-time echo-cancellation. Providing up to 70dB system gain, and 100dB max gain with IntelliBoost. Advanced digital echo-cancellation (>30dB) and channel select filtering algorithms. Telstra GO Cellmate Portable Mobile Repeater actively manages the cellular link between the cell tower and user devices.
• The Linearity high-performance precision-calibrated RF front end virtually eliminates Intermodulation Desense (IMD) issues. Remains fully functional, even when there are other RF emitters present
• Network Coverage - Automatically adapts to fit the area to be covered, from small vehicles to large homes or offices up to 1200 m2 (13,000 ft2 ), or more for open spaces Any subscriber device from the configured Operator will benefit from improved coverage.
• System Bandwidth - Single button control allows users to select WCDMA(3G), LTE(4G) or AUTOMATIC to let GO relay the best available technology. Ability to learn and adapt to changing network channels or network re-farming. Total system relay bandwidth: Up to 20 MHz. Uplink Muting Mode automatically shuts down uplink cellular transmissions when no active user equipment is detected.
• Secure - Completely network safe, doesn’t degrade macro capacity. Ultimate control of the devices in the field resides with the network operator. End-to-end cellular communication encryption without additional risk of vulnerability
• Maximizes signal-to-noise (SNR) ratio - provides better data rates without negatively impacting macrocells
• System Management – LED User Indicators for Mode and Status. Simple, built-in, self-test. Silent operation. The system can be managed via Cel-Fi WAVE Cloud Mobile and desktop applications. Software-managed system intelligence prevents uplink system gain from exceeding path loss, eliminating unnecessary rise in base station noise level. No ongoing maintenance is needed, nor reliance upon the Internet, GPS, or handsets to be configured on the system. Software Updates and technical support, with the Cell-Fi WAVE mobile app. Does it connect to Cel-Fi COMPASS
• Bluetooth LE enables the system to communicate with smartphones and the Cel-Fi WAVE mobile app, improving the user experience and adding the capability to the product

Compliance

• 3GPP Rel.10
• Bluetooth LE

Antenna Requirements (required if included in box?)

• 50ohm antenna matching
• Antenna cables require SMA-Male connectors
• VSWR <2:1
• Antennas should support appropriate device band frequencies

Power

• 9.6 to 28.8 VDC via external supply
• External supply: 100 to 240 VAC, 47 – 63Hz
• Power consumption less than 15W per unit

Environmental

• Ambient operating temperature: 0° to 65°C
• Storage temperature: -25° to 65°C
• Conduction cooling
• Relative humidity: 0% to 95%, noncondensing
• RoHS II 2011/65/EU
• WEEE (2002/96/EC)
• CE
• IP Rating: 54
• Outdoor NEMA 4 Rating

Dimensions

• Height: 255mm
• Width: 87mm
• Length: 28mm
• Weight: 600g
• repeater unit, not full kit

Radio Performance

• Downlink (max)– Bands 3, 5, 28 (16 dBm)
• Uplink – Bands 3 (22 dBm),